Print Page | Close Window

700 PSS

Printed From: OpticsTalk by SWFA, Inc.
Category: Everything Else
Forum Name: Almost Anything Goes
Forum Description: Non OpticsTalk Talk
URL: http://www.opticstalk.com/forum_posts.asp?TID=903
Printed Date: March/28/2024 at 20:48
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: 700 PSS
Posted By: redneckbmxer24
Subject: 700 PSS
Date Posted: October/28/2004 at 10:26

ok, i just finished my tactical entry rifle... its a RRA lower with a ace AFRX-e stock, NM trigger, Elite CAR upper with the midlenght handhuard, and i oredered my acc., a YHM light wiehgt 4 rail handguard, MOUT sling, and a verticle grip from bravocompanyusa.com, and a first samco grip from cabelas. and i decided to use a ML2 in a GG&G mount i had laying around. and since i felt guilty about buy NOTHING for this from SWFA, i went and ordered my sniper rifle. and at the moment, i am broke, so i have a month, or better to decide which scope to get. either the SS10X42M, or the leupold MK4 10X M1. its a 700 PSS, i will be ordering MK4 bases foirm swfa, and badger rings. what rings will clear the scopes with butler creek flip ups on this gun??? im thinking about getting the max 50's. tell me your opinions.

 

cory



-------------
If guns are outlawed, only outlaws will have guns, I'll be only one of millions!!!



Replies:
Posted By: Boomholzer
Date Posted: November/03/2004 at 21:25

I did some numbers with the MK4 base and TPS "low" rings and found that they would easily have enough clearance on a 700 with a 40mm OBJ.  I dont have the numbers to compare the rings to the Badgers but I would bet that the "low" rings will provide adequate clearance even with the caps.

 

I learned that in the end, cheek weld and personal preference on head placement relative to the stock rules.  I abandoned my goal to always keep the optics as close to the bore axis as possible.  On my last bolt, I gained some performance by raising the scope .2". 

 

My opinion is to always evaluate the weakest link.  I think that stresses on the optics tube and a shift in the base to rcvr is more likely to be a long-term detriment than any shift between the rings to scope.  Given you most likely have a .308, the contact surface area on both base to ring and ring to scope tube is way overkill with the Max-50s. The added width of the rings will pronounce any error in tolerance when you seat them together and that will put more stress on the tube. 

 

Having your base bedded to the receiver will provide more benefit then the addition of the Max-50 rings.  Of course you can always lapp the rings however I think it is less of a necessity with the standard ones.

 

My .02

 

Post pics of that AR!

 

 

 



Posted By: redneckbmxer24
Date Posted: November/04/2004 at 07:01

havnt gotten the upper back from the gunsmith, but i will be posting some pics as soon as i get it back, which should be today wit any luck. i am going to go with the standard badgers, and at the moment im going with a GG&G 20MOA base, HS precision stock with the adjustable cheek peice, and butt, and a Hart #5 contour barrel. i think im going to go with medium high rings though, but i mihgt downsize to medium. my 300 ultra mag has low rings, and a Vari-x III 4.5-14, and i had to slide the scope forward, becuase it rested on the barrel.

 

cory



-------------
If guns are outlawed, only outlaws will have guns, I'll be only one of millions!!!


Posted By: redneckbmxer24
Date Posted: November/04/2004 at 09:18

ohh, and the scope im looking at is the 3.5-10x40 MK4 M1.

 

cory



-------------
If guns are outlawed, only outlaws will have guns, I'll be only one of millions!!!


Posted By: Chris Farris
Date Posted: November/09/2004 at 16:50
Any pics yet???

-------------
SWFA, Inc.
http://SWFA.com - SWFA.com
http://www.swfa-ss.com - SWFA-SS.com
http://www.mil-dot.com - Mil-Dot.com
http://www.samplelist.com - SampleList.com


Posted By: redneckbmxer24
Date Posted: November/10/2004 at 16:12

yeah man, i took the pics, but i cant find my card reader..... the search continues.

 

cory



-------------
If guns are outlawed, only outlaws will have guns, I'll be only one of millions!!!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net