Print Page | Close Window

Nikon Omega- Resetting factory settings?

Printed From: OpticsTalk by SWFA, Inc.
Category: Scopes
Forum Name: Shotgun / BlackPowder Scopes
Forum Description: Turkey, slug barrel and smoke pole scopes
URL: http://www.opticstalk.com/forum_posts.asp?TID=7831
Printed Date: March/29/2024 at 04:47
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Nikon Omega- Resetting factory settings?
Posted By: det07
Subject: Nikon Omega- Resetting factory settings?
Date Posted: September/16/2007 at 00:04
I am replacing the rings/mount on my T/C omega.I have a nikon omega scope. I would like to center the windage/elevation like how it is shipped from the factory. How can I accurately do this? Do I count clicks? or is there a better way?



Replies:
Posted By: Pooreyes-2
Date Posted: September/16/2007 at 06:19

 

 

   Not sure, But I was told to do this to count mind, and to go back half to get back to center.

 

Take the scope all the way down or up, stopping when it gets tight, (Dont try to go any more), then count them all the way back to the other end, Then go half way, that should be it.

 

 Hope this helps.



Posted By: HAWKEYE6MM
Date Posted: February/06/2008 at 19:50

I agree with POOREYES, I did that with my 2x7x32 LEUPOLD. it put point of impact right in the center to start the adjustment process.



-------------
"KEEPIN MY POWDER DRY"



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net