Print Page | Close Window

focus problem

Printed From: OpticsTalk by SWFA, Inc.
Category: Other Optics
Forum Name: Binoculars
Forum Description: Anything that requires two eyes to look through it
URL: http://www.opticstalk.com/forum_posts.asp?TID=46962
Printed Date: November/30/2022 at 02:25
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: focus problem
Posted By: stonefly4
Subject: focus problem
Date Posted: April/30/2022 at 15:10
I recently bought a pair of Tasco binoculars online, 7X35.

They only focus far away, with the focus adjustment all the way to the right.

There are many birds I'd like to view that are much closer. The long range focus has them in a blur, but any attempt to bring them in focus only makes things worse. The binoculars only focus on things a hundred yards away. Turning the focus adjustment to the left, at all, only loses focus for everything, near and far.

Can I fix this? Is there a way to further adjust these binoculars to overcome this problem?





Replies:
Posted By: Scrumbag
Date Posted: May/02/2022 at 04:47
Not got direct experience of that model but check the eye pieces are set so they aren't applying correction for eyesight you don't need.

Welcome on board.

Scrummy


-------------
Was sure I had a point when I started this post...


Posted By: Dogger
Date Posted: May/02/2022 at 05:03
It sounds like you have a bad pair with no easy fix, hopefully still warranty if a recent purchase.

-------------
God save the Empire!


Posted By: WJC
Date Posted: September/01/2022 at 16:31
There are TWO focus wheels. The center knob and the diopter on the right eyepiece. They must be focused in the correct order. TASCO has never been known for importing world-class binoculars. But, try focusing on a target 30 away with the focus wheel and then use the diopter ring to bring the image to its sharpest on both sides.

See is that will do it for you.

Bill


-------------
“Water, water everywhere nor any drop to drink.” — Samuel Taylor Coleridge
“Social media everywhere but not a thought to think.” — me




Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net