Print Page | Close Window

Help

Printed From: OpticsTalk by SWFA, Inc.
Category: Mounts & Accessories
Forum Name: Rings and bases
Forum Description: Any brand or type of ring or base
URL: http://www.opticstalk.com/forum_posts.asp?TID=3466
Printed Date: March/28/2024 at 05:12
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Help
Posted By: match308
Subject: Help
Date Posted: March/26/2006 at 15:19
OK guys, help me out, please. I have a Remington 700 PSS in 308 with AICS Stock. Mounted is a badger Ord 25moa picatinny. I have prchased a Zeiss Conquest 4.5-14 x 44, it has a 1" tube. I am stuck on height issues. I am either buyin one that are too high or too low. Anyone know of a set of rings that will work for this setup? Much thanks for any advice.

-------------
tbannister



Replies:
Posted By: cheaptrick
Date Posted: March/26/2006 at 17:28

Welcome to The OT!!!

 

Are you sure that you don't mean a 20 MOA Badger rail??

I didn't think they made a 25 MOA rail.

Only zero, 20, and 30 MOA rails. 

 

Standard Badger rings "should" work, but you'll need the 1" reducers as well.

 

I have a Remington VS with a 20 MOA rail with standard rings mounting up a 10x42mm Super Sniper and I have plenty of room for BC caps to boot.

 

Do you have a adjustable cheek piece with that AICS stock??

If you want to stay with Badger's, give Chris or the gang @ SWFA a call to help you.

They will!!



-------------
If at first you don't secede...try..try again.


Posted By: match308
Date Posted: March/26/2006 at 19:03

Thanks much,

The rail is an Evolution Gun Works 25 moa, but few people seem to know about the, so I call it a badger for purposes of commo.

I do have the adjustable cheek piece. Would this necessitate stepping up to the medium rings?



-------------
tbannister


Posted By: cheaptrick
Date Posted: March/26/2006 at 19:10

http://www.snipershide.com/cgi-bin/ubbcgi/ultimatebb.cgi - http://www.snipershide.com/cgi-bin/ubbcgi/ultimatebb.cgi

 

Go here and ask the gang at Snipers Hide about that.

I think most adjustable cheek piece stocks I have seen have used higher (medium in your case) rings.

These guys are amazing in their expertise and very helpful.

 

I would hate to steer you wrong on this one, Brother.

I know what it's like to have the wrong rings come UPS and have to send them back.

 

Regards,

cheaptrick



-------------
If at first you don't secede...try..try again.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net