Print Page | Close Window

Scope mount on Muzzie

Printed From: OpticsTalk by SWFA, Inc.
Category: Scopes
Forum Name: Shotgun / BlackPowder Scopes
Forum Description: Turkey, slug barrel and smoke pole scopes
URL: http://www.opticstalk.com/forum_posts.asp?TID=33308
Printed Date: October/21/2017 at 05:36


Topic: Scope mount on Muzzie
Posted By: sforeman
Subject: Scope mount on Muzzie
Date Posted: June/26/2012 at 16:24
Bought new TC Omega Dream Season, Zeiss Conquest, and Talley one piece to put it all together. Even a gunsmith can"t mount it without sliding the scope all the way back. I only have full reticle when I push muzzie away from my shoulder. What's up with that?

-------------
Foreman



Replies:
Posted By: SVT_Tactical
Date Posted: June/27/2012 at 07:52

What conquest is it?  Can you get a measurement from the scope to your eye when you can actually see through it?  also a picture of how its mounted would be helpful.  You can email me a photo and I can post it for you if needed.  PM me if you want to.



-------------
"Most folks are about as happy as they make their minds up to be" - Abraham Lincoln


Posted By: Urimaginaryfrnd
Date Posted: June/27/2012 at 21:51
Under most conditions I like Talley one piece ringmounts.  Unfortunately it sounds like you need more ability to adjust scope position than the mounted one piece ringmount will allow. On my Encore I used this Plus 20 MOA base and there are a number of makes of picatinny type rings that will work the least expensive ones that work are the Warne rings. The Talleys,  Badger Ordnance, Seekins, TPS and a bunch more will all work with this base and allow more range of adjusting scope placement.
http://swfa.com/Talley-Tactical-1-Rings-C2740.aspx - http://swfa.com/Talley-Tactical-1-Rings-C2740.aspx
http://swfa.com/TPS-TSR-Scope-1-Rings-C2716.aspx - http://swfa.com/TPS-TSR-Scope-1-Rings-C2716.aspx
http://swfa.com/Warne-Maxima-Permanent-Attach-1-Rings-C2378.aspx - http://swfa.com/Warne-Maxima-Permanent-Attach-1-Rings-C2378.aspx
 
http://swfa.com/Talley-1-Piece-Base-P49376.aspx">Talley 1 Piece Base http://swfa.com/Talley-1-Piece-Base-P49376.aspx - Bobby Paul Doherty
Texas Ranger


Posted By: Urimaginaryfrnd
Date Posted: June/27/2012 at 21:53
If you know you dont need the angled base for long range work they do make a flat one.
http://swfa.com/Talley-1-Piece-Base-P49375.aspx">Talley 1 Piece Base http://swfa.com/Talley-1-Piece-Base-P49375.aspx - Bobby Paul Doherty
Texas Ranger



Print Page | Close Window