Print Page | Close Window

help with this item

Printed From: OpticsTalk by SWFA, Inc.
Category: Scopes
Forum Name: Rifle Scopes
Forum Description: Centerfire long gun scopes
Printed Date: June/18/2018 at 21:57
Software Version: Web Wiz Forums 11.10 -

Topic: help with this item
Posted By: taminsong
Subject: help with this item
Date Posted: April/20/2009 at 22:50
Hi to all,

I'm a newbie here. Would like to ask for some help regarding the item on the link. Maybe somebody here can point me to a correct direction.

< ="-" ="text/; =utf-8">< name="ProgId" ="Word.">< name="Generator" ="Microsoft Word 11">< name="Originator" ="Microsoft Word 11"> file:///C:%5CDOCUME%7E1%5CKYNTH%5CLOCALS%7E1%5CTemp%5Cmsohtml1%5C01%5Cclip_filelist.xml - file:///C:%5CDOCUME%7E1%5CKYNTH%5CLOCALS%7E1%5CTemp%5Cmsohtml1%5C01%5Cclip_editdata.mso - -

Any body has experienced using this item?

I was able to get a 3x10x42 30mm scope from a friend in a good deal, but my problem is, I don't have the base to mount this scope.

I will mount it in my Anschutz 1451KV 22 rifle which has a 11mm dovetail.

Thanks for any advice.

Posted By: Steelbenz
Date Posted: April/20/2009 at 23:02
No, but it looks like it will raise the scope way high though. PM Chris Farris or Chris Farris II and see if they can hook you up with a mount or right set of rings for that bad boy.  

"Don't argue with a fool! From a distance you can't really tell who's who!"

Posted By: Ed Connelly
Date Posted: April/20/2009 at 23:43
You can get 11mm dovetail rings from Millett. -
They're high ones, too.  But they fit. 
You can probably get an adapter base that goes on 11mm dovetailed receivers to fit various rings, also.  They would probably be available from Brownells. -

Be sure to visit, - THE ED SHOW

Ju Cucarachas!!!

Posted By: taminsong
Date Posted: April/21/2009 at 00:53
Thank you.

I have already PM Chris Farris and asked his help.

I'll wait for his reply in the meantime.

Posted By: KB0WZL
Date Posted: April/21/2009 at 13:37
Millett has 11 mm rings in steel and they also have a 22 tip off riser that works well as when its installed you can use weaver type rings on your 22.   The dealers can order them if they do not have them from Bushnell.  800 MILLETT
part # RISER                                               RI00002
           11 MM  1 " RING    MED                    TP00713
                        1"            HI                        TP00714
                        30MM      HI                         TP00715
Hope this helps
If you are going to  NRA  show in PHX please stop in the Bushnell booth and introduce your self.  Like to meet  you guys in person.
Millett/ Bushnell


Posted By: KB0WZL
Date Posted: April/21/2009 at 13:40
Correction:   when I said dealers that should be SWFA as Chris does a great job with Millett and bushnell.  
Sorry was not thinking where I was at and we want to support those that support us.


Posted By: taminsong
Date Posted: April/22/2009 at 03:18

Thanks for the help, but I cannot find the riser you said. Can you point me to some link so that I can have an idea?

I'm more interested in meeting you in person.Big Smile

Are you aware that I'm in the Philippines? If yes, where's the address of the show and when?

I lived in South Cotabato, but if the show is in Manila, oh my, it's too far from me. But then, maybe I can come. I wish I could....

Thanks for the help.

Posted By: KB0WZL
Date Posted: April/22/2009 at 22:19
Sorry I did not realize you were out of the States.   I would contact to see if they have them.
I get to the PI once and and while,   Wife is from Cebu.
Take care



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 -
Copyright ©2001-2017 Web Wiz Ltd. -