Print Page | Close Window

Anybody watch this?

Printed From: OpticsTalk by SWFA, Inc.
Category: Everything Else
Forum Name: Almost Anything Goes
Forum Description: Non OpticsTalk Talk
URL: http://www.opticstalk.com/forum_posts.asp?TID=15836
Printed Date: March/29/2024 at 09:52
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Anybody watch this?
Posted By: trigger29
Subject: Anybody watch this?
Date Posted: March/02/2009 at 19:21
My wife was watching CSI.............and I was sitting  here as usual. They were investigating a crime in which someone was shot with a handgun with old ammo. According to the investigator, the first shot the powder didn't burn, leaving the bullet half way down the barrel. The second shot was fired, and the second bullet ran into the first, leaving a dent in the base of the first bullet, and pushing it out the end of the barrel. I know it's just a t.v. show, but I don't think I'm buying it.

-------------

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."



Replies:
Posted By: Monster
Date Posted: March/02/2009 at 19:24
I think they did this on guns and ammo and the bullet comes out but not with any velocity that would be close to killing anyone.

-------------
"Get Busy Livin' or get busy dyin'" -Red (Shawshank Redemption)


Posted By: rifle looney
Date Posted: March/02/2009 at 19:38
I own a S@W in 38 special and someone did this to it, it has a bulge in the barrel about competitor but it shoots great ....yes I have had it carefully looked at and it is fine too shoot.
but this is proof this crap happens!   Shocked


-------------




Posted By: budperm
Date Posted: March/02/2009 at 20:05
Originally posted by rifle looney rifle looney wrote:

I own a S@W in 38 special and someone did this to it, it has a bulge in the barrel about competitor but it shoots great ....yes I have had it carefully looked at and it is fine too shoot.
but this is proof this crap happens!   Shocked
 
 
Funny you should mention. 
I have my fathers S&W 38 Poice Special and It's on its 3rd barrel.  I remember dad coming home from the range and the barrel was all bloated and twice the size it should be for about 2.5"  Turns out there was 3 bullets stuck in it.  He had it replaced and timed and it shot okay for a few years of light use.  I got it and about the 3rd time I fired it one round had excessive flash & sparks out of the frame and back of barrel.  I closely inspected it and found the forcer cone cracked and flaired inside the frame from an obvious bullet impact.  I haven't shot it since and am afraid of it.  Under further inspection I found one position in the cylinder rotation that has backlash and will allow the cylinder to rotate about 1/3 of the bullets diameter backwards during firing, totally messing the timing up on that postion.   I plan on having the gun distroyed because it is not safe or worth repairing. 
 
I sugggest anybody that has one to carefully check the timing & backlash of cylinder for every postion of rotation!


-------------
"Peace is that brief glorious moment in history when everybody stands around reloading".
--Thomas Jefferson





Posted By: rifle looney
Date Posted: March/02/2009 at 20:09
Bud if this gun has any sentimental value just take out the firing pin and deem it un fireable?

-------------




Posted By: budperm
Date Posted: March/02/2009 at 20:10
Damn my memory is getting bad!  Mine gun is a Colt 38 Police Special 4" bbl not a S&W.  I just pulled it out of the safe to verify.  Oh and the backlash did not occur everytime that position came up.

-------------
"Peace is that brief glorious moment in history when everybody stands around reloading".
--Thomas Jefferson





Posted By: rifle looney
Date Posted: March/02/2009 at 20:13
If it is a colt don't destroy it! it does have a floating pin right? remove it.

-------------




Posted By: budperm
Date Posted: March/02/2009 at 20:38
Originally posted by rifle looney rifle looney wrote:

If it is a colt don't destroy it! it does have a floating pin right? remove it.
Yes, the pin is mounted on the hammer and pivots slightly. i can just make out the outline of the retaining pin on the side of the hammer.  The workmanship on this thing in so tight I can hardly see any seams, too bad I don't trust it.
 
Why do you object to my having it destroyed?  I am afraid that if it gets into anyone elses hands that don't know about its weakness that they will get hurt.


-------------
"Peace is that brief glorious moment in history when everybody stands around reloading".
--Thomas Jefferson





Posted By: rifle looney
Date Posted: March/02/2009 at 20:48
Well even in that condition it is collectable too some and it is a COLT if you dont want it take it somewhere have the pin removed sell it like that explained why,  and you have no worries  look on gun broker and see if it would be worth the effort? a good smith could fix it and barrels are cheap and plentiful. some who is interested knows this! just thought.

-------------




Posted By: Urimaginaryfrnd
Date Posted: March/02/2009 at 20:55
Originally posted by budperm budperm wrote:

Originally posted by rifle looney rifle looney wrote:

I own a S@W in 38 special and someone did this to it, it has a bulge in the barrel about competitor but it shoots great ....yes I have had it carefully looked at and it is fine too shoot.
but this is proof this crap happens!   Shocked
 
 
Funny you should mention. 
I have my fathers S&W 38 Poice Special and It's on its 3rd barrel.  I remember dad coming home from the range and the barrel was all bloated and twice the size it should be for about 2.5"  Turns out there was 3 bullets stuck in it.  He had it replaced and timed and it shot okay for a few years of light use.  I got it and about the 3rd time I fired it one round had excessive flash & sparks out of the frame and back of barrel.  I closely inspected it and found the forcer cone cracked and flaired inside the frame from an obvious bullet impact.  I haven't shot it since and am afraid of it.  Under further inspection I found one position in the cylinder rotation that has backlash and will allow the cylinder to rotate about 1/3 of the bullets diameter backwards during firing, totally messing the timing up on that postion.   I plan on having the gun distroyed because it is not safe or worth repairing. 
 
I sugggest anybody that has one to carefully check the timing & backlash of cylinder for every postion of rotation!
 
TIME OUT -- Hold that thought  find somewhere they are having a gun buy back and sell it to them.  Personally I would have it repaired by Colt. What you will find on those that are not in timing double action is that they will work flawlessly in single action mode.


-------------

"Always do the right thing, just because it is the right thing to do".
Bobby Paul Doherty
Texas Ranger


Posted By: rifle looney
Date Posted: March/02/2009 at 20:56
SSSSHHHHH! its a COLT.  better yet.

-------------




Posted By: Urimaginaryfrnd
Date Posted: March/02/2009 at 21:00
Send it to me Ill destroy it for you (one round at a time single action) Roll on Floor Laughing

-------------

"Always do the right thing, just because it is the right thing to do".
Bobby Paul Doherty
Texas Ranger


Posted By: Urimaginaryfrnd
Date Posted: March/02/2009 at 21:05
http://www.speer-bullets.com/products/accessories.aspx - http://www.speer-bullets.com/products/accessories.aspx

Plastic Training Components

Do you want to get a little handgun practice at times you can't get to the range? Don't have a heavy-duty backstop in the garage? SPEER Plastic Training Components are the prescription you need for short-range practice. This isn't loaded ammo. We make the bullets and cases--you supply the power. A standard large pistol primer provides all the power needed to propel the reusable bullets at velocities between 300 and 400 ft/sec. Cases are reusable, too. You don't even need reloading equipment to assemble Speer practice ammo. The case/bullet system is available for 38/357 and 44 caliber revolvers. For the 45 Auto, use our bullet and a standard 45 Auto brass case with a drilled-out flash hole. A backstop for these bullets can be quickly built from a cardboard box and carpet scraps.

Bullets and cases are sold separately so you can replace lost or damaged bullets.

SAFETY FIRST: Never use propellant when loading Plastic Training components. Treat the resulting ammunition with the same respect given conventional ammunition; velocity is high enough to injure the skin. Use only in well-ventilated areas. Brush the bore every 12-18 shots to prevent accumulation of primer residue.

 
 
These little red and black plastic bullets use only a primer no powder and will shoot through a paper target in your basement. Smile  You could be having more fun with this than you think.


-------------

"Always do the right thing, just because it is the right thing to do".
Bobby Paul Doherty
Texas Ranger


Posted By: budperm
Date Posted: March/02/2009 at 21:27
Originally posted by rifle looney rifle looney wrote:

Well even in that condition it is collectable too some and it is a COLT if you dont want it take it somewhere have the pin removed sell it like that explained why,  and you have no worries  look on gun broker and see if it would be worth the effort? a good smith could fix it and barrels are cheap and plentiful. some who is interested knows this! just thought.
 
Really???/ I was told that there were more of these revolvers made than any other modern revolver in US history.  It is stamped on barrel "Police Positive 38 Special" . I was lead to believe that it wasn't worth repairing.
 
I'll have to investigate further.


-------------
"Peace is that brief glorious moment in history when everybody stands around reloading".
--Thomas Jefferson





Posted By: trigger29
Date Posted: March/02/2009 at 21:31
Originally posted by Urimaginaryfrnd Urimaginaryfrnd wrote:

http://www.speer-bullets.com/products/accessories.aspx - http://www.speer-bullets.com/products/accessories.aspx

Plastic Training Components

Do you want to get a little handgun practice at times you can't get to the range? Don't have a heavy-duty backstop in the garage? SPEER Plastic Training Components are the prescription you need for short-range practice. This isn't loaded ammo. We make the bullets and cases--you supply the power. A standard large pistol primer provides all the power needed to propel the reusable bullets at velocities between 300 and 400 ft/sec. Cases are reusable, too. You don't even need reloading equipment to assemble Speer practice ammo. The case/bullet system is available for 38/357 and 44 caliber revolvers. For the 45 Auto, use our bullet and a standard 45 Auto brass case with a drilled-out flash hole. A backstop for these bullets can be quickly built from a cardboard box and carpet scraps.

Bullets and cases are sold separately so you can replace lost or damaged bullets.

SAFETY FIRST: Never use propellant when loading Plastic Training components. Treat the resulting ammunition with the same respect given conventional ammunition; velocity is high enough to injure the skin. Use only in well-ventilated areas. Brush the bore every 12-18 shots to prevent accumulation of primer residue.

 
 
These little red and black plastic bullets use only a primer no powder and will shoot through a paper target in your basement. Smile  You could be having more fun with this than you think.
 
They need to make these for rifles! Why can't someone invent a bullet that comes out at 3000 fps, doesn't make noise, and doesn't penetrate? Then I could sit on my deck, and shoot to the bean field down the street from my house, and not have to worry about copsBig Smile


-------------

"A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."


Posted By: budperm
Date Posted: March/02/2009 at 21:32
TIME OUT -- Hold that thought  find somewhere they are having a gun buy back and sell it to them.  Personally I would have it repaired by Colt. What you will find on those that are not in timing double action is that they will work flawlessly in single action mode.
[/QUOTE]
 
A gun Buyback, Mmmm hadn't thought of that.  My biggest complaint before this malfunction was that the handle is way small for my big meathook.


-------------
"Peace is that brief glorious moment in history when everybody stands around reloading".
--Thomas Jefferson





Posted By: rifle looney
Date Posted: March/02/2009 at 21:32
I just looked and depending on cond. as high as $1000.00 if it has special marking up that quite a bit also types of grips change it too!

-------------




Posted By: budperm
Date Posted: March/02/2009 at 21:33
Originally posted by Urimaginaryfrnd Urimaginaryfrnd wrote:

http://www.speer-bullets.com/products/accessories.aspx - http://www.speer-bullets.com/products/accessories.aspx

Plastic Training Components

Do you want to get a little handgun practice at times you can't get to the range? Don't have a heavy-duty backstop in the garage? SPEER Plastic Training Components are the prescription you need for short-range practice. This isn't loaded ammo. We make the bullets and cases--you supply the power. A standard large pistol primer provides all the power needed to propel the reusable bullets at velocities between 300 and 400 ft/sec. Cases are reusable, too. You don't even need reloading equipment to assemble Speer practice ammo. The case/bullet system is available for 38/357 and 44 caliber revolvers. For the 45 Auto, use our bullet and a standard 45 Auto brass case with a drilled-out flash hole. A backstop for these bullets can be quickly built from a cardboard box and carpet scraps.

Bullets and cases are sold separately so you can replace lost or damaged bullets.

SAFETY FIRST: Never use propellant when loading Plastic Training components. Treat the resulting ammunition with the same respect given conventional ammunition; velocity is high enough to injure the skin. Use only in well-ventilated areas. Brush the bore every 12-18 shots to prevent accumulation of primer residue.

 
 
These little red and black plastic bullets use only a primer no powder and will shoot through a paper target in your basement. Smile  You could be having more fun with this than you think.
Wow, thats a great idea!  To bad they don't have something for autos like this.

-------------
"Peace is that brief glorious moment in history when everybody stands around reloading".
--Thomas Jefferson





Posted By: rifle looney
Date Posted: March/02/2009 at 21:35
Forgot what this post was, we are clogging it up ....BYE...Howdy

-------------




Posted By: silver
Date Posted: March/02/2009 at 21:36
Twenty years ago it may have not been worth repairing, but that's not the case now.  Now with that said, Colt is about the only place to get those guns fixed any more.  Colt is more complicated than S&W and most people do not want to work on them.

-------------
"If we weren't all crazy we, We would go insane."   Jimmie Buffet

WWW.formitch.com



Posted By: budperm
Date Posted: March/02/2009 at 21:44
Originally posted by rifle looney rifle looney wrote:

I just looked and depending on cond. as high as $1000.00 if it has special marking up that quite a bit also types of grips change it too!
   
 
??????????? WHAT?????????
Again... I was told that there were more of these revolvers made than any other modern revolver in US history.  It is stamped on barrel "Police Positive 38 Special" . I was lead to believe that it wasn't worth repairing.
 
I'll try to remember to bring home my camera from work so I can take some pix and post them.


-------------
"Peace is that brief glorious moment in history when everybody stands around reloading".
--Thomas Jefferson





Posted By: rifle looney
Date Posted: March/02/2009 at 21:50
     OTAY!

-------------




Posted By: Ed Connelly
Date Posted: March/05/2009 at 10:36
I saw that last year................time to get some more Nachos..................

-------------
Be sure to visit,

http://www.opticstalk.com/forum_topics.asp?FID=50 - THE ED SHOW

Ju Cucarachas!!!


Posted By: budperm
Date Posted: March/05/2009 at 12:08
Originally posted by Ed Connelly Ed Connelly wrote:

I saw that last year................time to get some more Nachos..................
 
?


-------------
"Peace is that brief glorious moment in history when everybody stands around reloading".
--Thomas Jefferson






Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net