Visit the SWFA.com site to check out our current specials. |
Scope Mount Suggestions |
Post Reply |
Author | |
ghost82
Optics Apprentice Joined: August/22/2007 Location: United States Status: Offline Points: 84 |
Post Options
Thanks(0)
Posted: December/25/2007 at 09:03 |
I just got a Simmons Prosport 4-12x50 for my Savage 93 .17 HMR and im having trouble finding a good ring to mount it with. Ive got weaver bases and do not want to change those out. The Leopold Highs that i have are too low. Just wondering if anyone could recommend a good ring for mounting such a large objective.
|
|
Focus
Optics Master Conquistador!! Joined: June/05/2007 Location: Maine Status: Offline Points: 1006 |
Post Options
Thanks(0)
|
I recommend the burris signiture zee rings. Won't mark your scope with ring marks. Allows the ability to center the reticle no matter what, and holds very well. They come in medium and high, I get by with mediums on my savages with 44mm scopes. I believe you will too, but I'm not 100% sure with the 50mm...
Focus |
|
I Can See Clearly Now......<><
If Accurate rifles Are Interesting.....I've Got Some Savages That Are Getting Mighty Interesting...... |
|
tahqua
MODERATOR Have You Driven A Ford Lately? Joined: March/27/2006 Location: Michigan, USA Status: Offline Points: 9042 |
Post Options
Thanks(0)
|
Ghost82, what are you going to use this gun for?
If you are going going on walk-a-bouts with it I would like to offer something about the Z-ring dovetail mount. The Z-rings are well liked around here, mind you.
I had a pair of the high Z-ring rimfire mounted on a Webley Scott Patriot airgun. This gun is one of the most powerful spring guns available. In the first few rounds the mounts literally tipped over on the dovetail rail doing some damage. I think part of the problem is there is not much surface area on the clamp. This isn't just the Burris, either. I found when looking into the Leupold and others it was the same thing, not enough surface claming area. This again, is taking the basic Redfield dovetail and putting clamps on to utilize a Weaver base. In the original design for these it has stood the test of time and works on huge kickers.
Your gun is not a kicker by any means, but if you are going to be banging a high mounted, large objective scope around, it is something to think about.
The Weavers offer more surface area but are ugly. The Warnes are also heavier.
BTW, I tried a several different mounts and they all moved. I just treat the Patriot like a .458 now, no glass.
Doug Edited by tahqua - December/25/2007 at 12:20 |
|
RONK
Optics Master Extraordinaire Joined: April/05/2007 Location: United States Status: Offline Points: 3199 |
Post Options
Thanks(0)
|
Doug, I take it to mean that your rings tipped off the base sideways, correct? You're correct about the limited bearing surface of the clamping area on Burris Zees. Thier entire clamping system needs to go back to the drafting table IMHO. The Signature concept is brilliant, though. A Weaver or better yet, a Badger or TPS tactical ring would be a great improvement in the clamping area. I think that when recoil is that violent, if the clamp hadn't failed, something else would have, perhaps the scope?
|
|
ghost82
Optics Apprentice Joined: August/22/2007 Location: United States Status: Offline Points: 84 |
Post Options
Thanks(0)
|
I'd be using it for rabbit, squirrel and other small game critters. I really dont need anything too stout as its just a .17. I checked out the zee rings but the highest are "high" which only allow up to 60mm. According to Simmons dimensions the scope i have is 61.70 mm on the outside objective. Gonna have to go higher, cant find a company that makes anything above 56 to 60 though.
|
|
tahqua
MODERATOR Have You Driven A Ford Lately? Joined: March/27/2006 Location: Michigan, USA Status: Offline Points: 9042 |
Post Options
Thanks(0)
|
My rings moved in the same direction as the recoil, front to back. A heavy kicking centerfire would "tip" the rings forward. Because of the spring rebound the rings tipped rearward.
Sorry I don't have a better pic, but that Signature has been in Weaver rings on top of that Remy for seventeen years. It is my predator gun and gets dragged through all kinds of stuff getting hung up along the way. I have never had to change zero. Part of that is due to the Weaver's.
The Savage is a nice choice, BTW.
Edited by tahqua - December/25/2007 at 17:33 |
|
tahqua
MODERATOR Have You Driven A Ford Lately? Joined: March/27/2006 Location: Michigan, USA Status: Offline Points: 9042 |
Post Options
Thanks(0)
|
I just measured my objective with the Butler Creeks and I am at 62.5mm with a 2.5mm gap from the barrel.
|
|
ghost82
Optics Apprentice Joined: August/22/2007 Location: United States Status: Offline Points: 84 |
Post Options
Thanks(0)
|
Are yours the zee rings or weaver? And what height? Ill be snagging some if they are fitting yours ok. Also is your barrel standard contour, that may be whats hanging me is the heavy varmint barrel.
|
|
tahqua
MODERATOR Have You Driven A Ford Lately? Joined: March/27/2006 Location: Michigan, USA Status: Offline Points: 9042 |
Post Options
Thanks(0)
|
Standard contour barrel with high Weavers.
|
|
RONK
Optics Master Extraordinaire Joined: April/05/2007 Location: United States Status: Offline Points: 3199 |
Post Options
Thanks(0)
|
Weaver makes an extra-high ring, don't they?
|
|
tahqua
MODERATOR Have You Driven A Ford Lately? Joined: March/27/2006 Location: Michigan, USA Status: Offline Points: 9042 |
Post Options
Thanks(0)
|
Good call, RONK
|
|
tahqua
MODERATOR Have You Driven A Ford Lately? Joined: March/27/2006 Location: Michigan, USA Status: Offline Points: 9042 |
Post Options
Thanks(0)
|
Here's some more on the high mount Weaver
|
|
ghost82
Optics Apprentice Joined: August/22/2007 Location: United States Status: Offline Points: 84 |
Post Options
Thanks(0)
|
thx guys,,,should be getting a set of x-high grandslam weaver soon. Hope they will do the trick!
|
|
ghost82
Optics Apprentice Joined: August/22/2007 Location: United States Status: Offline Points: 84 |
Post Options
Thanks(0)
|
We'll darn, the ex-high weavers are too low as well. Any other suggestions?
|
|
RONK
Optics Master Extraordinaire Joined: April/05/2007 Location: United States Status: Offline Points: 3199 |
Post Options
Thanks(0)
|
That is surprising! You might want to go right to a see-through mount then. (The kind that have a tunnel under the scope tube, allowing the use of iron sights.) Weaver still makes a few models. Other than those, I don't think anything short of Badger Ultra-Highs will work, and they are almost 180 bucks a set.
Bushmaster sells base risers that would probably work, though.
|
|
ghost82
Optics Apprentice Joined: August/22/2007 Location: United States Status: Offline Points: 84 |
Post Options
Thanks(0)
|
Before i go that route i may drop 80 bucks into the warne tactical ultra highs. They add nearly an inch! should work, maybe i should just buy a smaller scope instead and avoid any other problems!!! Simmons doesnt really have any info either, bout as reliable as bsa.
|
|
ghost82
Optics Apprentice Joined: August/22/2007 Location: United States Status: Offline Points: 84 |
Post Options
Thanks(0)
|
Ronk, i took your suggestion and bought the see throughs afterall. Perfect fit! Ive got about about 4 or 5 mm under the bell for clearance. Thanks. Saved me alot they were only 16 bucks.
|
|
RONK
Optics Master Extraordinaire Joined: April/05/2007 Location: United States Status: Offline Points: 3199 |
Post Options
Thanks(0)
|
Alright! One of my suggestions actually worked! That's never happened before...
|
|
tahqua
MODERATOR Have You Driven A Ford Lately? Joined: March/27/2006 Location: Michigan, USA Status: Offline Points: 9042 |
Post Options
Thanks(0)
|
Good call |
|
RONK
Optics Master Extraordinaire Joined: April/05/2007 Location: United States Status: Offline Points: 3199 |
Post Options
Thanks(0)
|
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |