Visit the SWFA.com site to check out our current specials. |
Is the Vortex Viper 6x24 ffp still a good buy? |
Post Reply |
Author | |
New to Rilfes
Optics GrassHopper Joined: March/02/2014 Status: Offline Points: 5 |
Post Options
Thanks(0)
Posted: March/02/2014 at 17:40 |
I am thinking about buying a vortex viper pst 6-24x50 FFP scope. I am buying it based only on good reviews for mounting on a Remington 700 308 to possibly shoot as far as I can shoot out in the Nevada desert. No hunting, just long range shooting. Most reviews are from the past and I am not sure if any other scope beats it out now in the $1000 price range. Like is there a better bang for your buck scope? The vortex viper comes with a new reticle called the EBR-2C. Is this worth getting and waiting over the EBR-1 recticle. Here is a link to the recticles. http://www.vortexoptics.com/product/vortex-viper-pst-6-24x50-ffp-riflescope-with-ebr-1-mrad-reticle Thankyou |
|
M1Thumb
Optics Apprentice Joined: December/27/2012 Location: Washington Status: Offline Points: 139 |
Post Options
Thanks(0)
|
I have one mounted on a Savage 10 FCP HS-Precision and it works very well.
Being a FFP the cross hairs grow in size as you zoom in and will cover small objects at range. The range I shoot at is a 300 yard range and I can reliably see my bullet holes in the targets at that range that ARE NOT in the black. If I print out some custom targets on 8x11 paper with a gray shade instead of black I can spot the holes. The optics are clear but not near as good as my ATACR on my AR30-A1 338 - that said I have been very satisfied with the scope and the performance. At max zoom things are a tad fuzzy so I run up to 23 power max but generally shoot with it set at 10 - 12x I purchased mine in January of 2013 from SWFA.com
|
|
Geo-spatially speaking you missed :o)
|
|
M1Thumb
Optics Apprentice Joined: December/27/2012 Location: Washington Status: Offline Points: 139 |
Post Options
Thanks(0)
|
Oh BTW have ran the wind age and elevation all over the place then back to my 300 yd zero settings and the scope was dead on.
The adjusting knobs are nice and smooth and have a good feel to them.
|
|
Geo-spatially speaking you missed :o)
|
|
Rudy Dog
Optics GrassHopper Joined: March/06/2014 Status: Offline Points: 10 |
Post Options
Thanks(0)
|
My only complaint about the FFP PST's is the thickness of the reticle. I have done some figuring and it is a little shy of 1/4 MOA , not sure what kind of groups your gun/you are capable of but I am probably going to sell mine off and get a SFP with the smaller sub tensions.
|
|
koshkin
MODERATOR Dark Lord of Optics Joined: June/15/2004 Location: United States Status: Offline Points: 13182 |
Post Options
Thanks(0)
|
If you are looking for a FFP scope in the $1000 range, the options are pretty slim and Vortex is a good scope to turn to. Sightron S3 now has a FFP version of its S3 6-24x50 scope. I think Vortex has the better reticle, but Sightron has the somewhat better optics. It is a close call though and I do not know off hand which one of these I would get between the two.
Burris just announced a whole line of XTR II scopes with the higher magnification models being FFP. I liked what I saw at SHOT, but I have not tested them yet, so the jury is still out. ILya
|
|
M1Thumb
Optics Apprentice Joined: December/27/2012 Location: Washington Status: Offline Points: 139 |
Post Options
Thanks(0)
|
Rudy Dog - yup you are very correct on the fat reticle - would I buy another Vortex yes - but I would not buy another FFP scope will stick to secondary focal - as for grouping with the right load and a good day for my eyeballs I can get .5 MOA groups or a tad better out of my Savage pretty consistent - but I attribute that to the prep work I do on my reloads. And as koshkin points out the Sightron having better optics - I think it is a tad "clearer" optics wise compared to my Vortex. But in the end it is up to the individual what they like and recommend that one look through a scope in daylight and late or early morning light to make a decision |
|
Geo-spatially speaking you missed :o)
|
|
New to Rilfes
Optics GrassHopper Joined: March/02/2014 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Thanks for the posts and you bring up a good point about the reticle. Just how bad is it and should I look for something else? Is this a problem with all FFP scopes or did vortex somehow do a bad job with the reticle? Will I be able to see out to 1000 yards or will the reticle cover up the object? The other question is I heard that it doesn't have much elevation range adjustment? Do you agree with this, does it ever cause any issues? |
|
koshkin
MODERATOR Dark Lord of Optics Joined: June/15/2004 Location: United States Status: Offline Points: 13182 |
Post Options
Thanks(0)
|
Reticle size is a matter of preference. I prefer reticles on the thick side and I have never found that detrimental to my shooting (within certain limits of course). The line thickness on the MOA reticles in the 6-24x50 FFP is either 0.18 MOA (EBR-1) or 0.1 MOA (EBR-2C). I have a hard time imagining that as being too thick for any situation I might run into. ILya
|
|
New to Rilfes
Optics GrassHopper Joined: March/02/2014 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Thanks, what about the elevation adjustment? Because it doesn't have much elevation adjustment will this cause any problems?
|
|
budperm
Optics Retard show me your sheep!! Joined: January/01/2009 Location: Pennsylvania Status: Offline Points: 31710 |
Post Options
Thanks(0)
|
You can just get a 10 or 20MOA rail to mount it on so most all your elevation adjustment is biased upward... |
|
"Peace is that brief glorious moment in history when everybody stands around reloading".
--Thomas Jefferson |
|
New to Rilfes
Optics GrassHopper Joined: March/02/2014 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
I am not sure how far I will shoot, but should I buy a riser rail? Approximately, how many yards can a vortex viper shoot up to without needed a riser rail? |
|
budperm
Optics Retard show me your sheep!! Joined: January/01/2009 Location: Pennsylvania Status: Offline Points: 31710 |
Post Options
Thanks(0)
|
Well you'll have to do some math there. balistic drop of your round will determine that.
You can count clicks of elevation and if you know how many clicks equal 1 MOA then you should be able calculate max elevation before hold over is required... adding a riser effectively shifts declination clicks into inclination clicks giving you more distance before hold-over...
Find out how many clicks of elevation you have without a riser then calculate how much rise you need to reach the distances you want. As lon as you can zero at 100yds or even 2ooyds with only a few declination clicks you should still be fine...
|
|
"Peace is that brief glorious moment in history when everybody stands around reloading".
--Thomas Jefferson |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |