Visit the SWFA.com site to check out our current specials. |
New AR15 Rifle |
Post Reply |
Author | |
dezmick
Optics Apprentice Joined: February/14/2008 Location: Oregon Status: Offline Points: 163 |
Post Options
Thanks(0)
Posted: April/24/2012 at 23:37 |
I am looking at getting a new AR15, i do not want to build my own i just want to buy one that is already built, i will have about 1500 to spend on the rifle, i have been looking at Stag Arms, DPMS, Smith & Wesson, and Rock River Arms, of those which would you go with and what exact rifle do you like from the company you would get one from even if it is not one that i have listed. These are the Four that i have been looking at. Thanks
|
|
bugsNbows
Optics God bowsNbugs Joined: March/10/2008 Location: North Georgia Status: Offline Points: 11200 |
Post Options
Thanks(0)
|
What are you looking to do with it? The tacticool / LE / Military versions are selling very well now (perhaps in part due to the upcoming elections). Plinking or hunting versions may be a bit easier to get (more quickly). Securing top tier brands (LaRue, Noveske, Baer, etc.) will be a test of your patience... LOL.
I've been researching them myself (for a purchase) and it has been an experience. Most of the big builders are way backed up with orders. Some told me 6-8 MONTHS + for a build. The normal wait is about 2-3 months. I ended up going a bit different route as I wanted a "hunting" model and thus opted for a 6.5 Grendel build from Alexander Arms. I was told the build time for it is about 2-3 months. From your list. I'd say either RRA or Stag Arms. They both produce good weapons that can be very accurate. I was looking at the RRA Predator Pursuit and the Stag Varminter. I'm sure either would have been fine. I just couldn't get exactly what I wanted. Good luck in your quest. |
|
If we're not suppose to eat animals...how come they're made of meat?
Anomymous |
|
cpwomack
Optics Journeyman Joined: January/29/2009 Location: Chattanooga Status: Offline Points: 550 |
Post Options
Thanks(0)
|
I would look at Bravo Company Manufacturing, White Oak Armament, or even Palmetto State Armory. Not long ago I ordered a stripped lower from Palmetto State Armory ($79.99) and a lower build kit. The ordered a mid-length carbine upper. I did build the lower and change out the stock handguards, but I have a good AR-15 with a FN built barrel for about $800.
|
|
cheaptrick
MODERATOR Joined: September/27/2004 Location: South Carolina Status: Offline Points: 20844 |
Post Options
Thanks(0)
|
Why do you not want to build one?
If I had $1500 to spend and were getting an out of the box, SHTF, flat top, quality built, no nonsense, ready to go AR....it would be the Colt 6920. |
|
If at first you don't secede...try..try again.
|
|
jselsor
Optics Journeyman Joined: August/01/2011 Location: MO Status: Offline Points: 328 |
Post Options
Thanks(0)
|
Build it You will learn the in's and out's of your rifle. Understanding how it works makes trouble shooting much easier if your rifle malfunctions. It is very rewarding once completed.
|
|
Dont take yourself to seriously
|
|
cheaptrick
MODERATOR Joined: September/27/2004 Location: South Carolina Status: Offline Points: 20844 |
Post Options
Thanks(0)
|
Concur!! One caveat: If it's your very first AR experience, buy the 6920, then build the next one. Getting a "base" quality AR let's you figure out what you like or dislike about your rifle. AR's are SO modular, it's almost a fault. If you build your first one, your going get on ARFCOM, buy every stinkin whiz bang, "tactical", 1/3rd co-witnessing, anti-fail, have to have gadget out there and your going to make an expensive mess and you ain't going to know what the hell you got....'cept a wicked ass credit card bill. IMO, of course.
|
|
If at first you don't secede...try..try again.
|
|
gulf1263
Optics Apprentice Joined: June/15/2011 Location: Alaska Status: Offline Points: 212 |
Post Options
Thanks(0)
|
IMHO you can for $1,500.00 get a Colt 1640, a S&W M&P 15 ($1,350) or a BCM.
These are tier one rifles that will hold up during a carbine course and will keep much of their value. Many course operators won't allow home built guns anymore because they break so often..for your first gun get the very best, that way if you decide to build one you will know what a quality gun is and how reliable it can be. Buy cheap, unreliable and you will end up paying in gunsmith fees what a first tier gun would have cost in the first place, you won't have shot the garbage gun much and won't have money for training and ammo. S&W's top end models can often be found on sale..the top end guns are about as good as the Colts and are very solid guns. You don't need fancy but reliable, Colt, S&W MP 15 and BCM are good solid guns and the companies stand behind them and you have a much better chance of getting a gun that works right and will hold up. If warranty becomes and issue these companies will take care of the problem. Bushmaster, DPMS, Remington, et all have not held up well when it comes to training and hard use. One agency bought thirty four Bushmasters and only four did not have to be gunsmithed, seven had to have the uppers actually replaced by BCM uppers before they could get them to run right, the department armors told me they had to spend between seven and eleven hours per gun to get them to work. The departments next buy was S&W MP 15's and they only had two guns with minor problems and S&W fixed those under warranty. That is what I call a clue. Art That is what I call a clue |
|
Good day.
|
|
cheaptrick
MODERATOR Joined: September/27/2004 Location: South Carolina Status: Offline Points: 20844 |
Post Options
Thanks(0)
|
I also would agree that the S&W MP 15 is a good AR, from what I've seen at the range. I'm not sure if they would be in the same class as a Colt or a Bravo, but they are pretty good. I honestly don't know.
Art: I'm not familiar with a Colt 1640.
|
|
If at first you don't secede...try..try again.
|
|
gulf1263
Optics Apprentice Joined: June/15/2011 Location: Alaska Status: Offline Points: 212 |
Post Options
Thanks(0)
|
The Colt 1640 (I hope that is the right designation) has a monolithic rail from the gas block on the barrel all the way to the end of the receiver, easier to use with scopes and backup sights.
It is not pretty but works quite well. Just for reference S&W makes two tiers of M&P 15's, the tier one guns for police use are comparable to the Colts, parts are MPI (magnetically particle inspected) bolts are shotpeened and inspected, etc. The second tier guns are like a Bushmaster, Remington or DPMS. Stay away from these unless you like to visit a gunsmith. pay lots of money and change out lots of parts..like the whole top end. Get the first tier gun and you will be good to go. BCM makes great guns and uppers but they are not always available, Colts and M&P's usually are. BCM's are halfway in between the tier one and and the boutique guns like the Noveseke, LMT, LaRue, etc. Colt and S&W are trying to reach out to the civilian market so their products are getting easier to find. Along with gun you will need to buy ammo, sights and take a quality carbine course, a quality carbine course, not some guy's who claim to be HSLD but someone with a proven record of teaching. Think Gunsite on the soft end and Pat Rogers on the hard, pointy end. Being able to properly run the gun makes a world of difference and becomes fun, a guy can make some ammo money from people who think they know it all. Art |
|
Good day.
|
|
gulf1263
Optics Apprentice Joined: June/15/2011 Location: Alaska Status: Offline Points: 212 |
Post Options
Thanks(0)
|
Colt 6940, Colt 6940.
Duh..I apologize! The rifle I was talking about was the Colt 6940, Colt 6940, not 1640. Anyway the Colt 6940 is the one with the monolithic rail. Next time I will read the model number off the receiver. Again I apologize for my mistake and any confusion it has caused. Thanks Art |
|
Good day.
|
|
BeltFed
Optics Retard Joined: February/12/2008 Location: Ky Status: Offline Points: 22284 |
Post Options
Thanks(0)
|
Dezmick, what is your intended purposefor this rifle? I typed out a long response, and then realized I had no idea what you wanted the rifle to do, and your 4 choices basically had 3 different uses, by design.
|
|
Life's concerns should be about the 120lb pack your trying to get to the top of the mountain, and not the rock in your boot.
|
|
gulf1263
Optics Apprentice Joined: June/15/2011 Location: Alaska Status: Offline Points: 212 |
Post Options
Thanks(0)
|
Hello all:
CDNN has the S&W M&P 15 with flat top full length rail for $1099.00, flip up sights included. This looks to be a good buy, similar to the Colt 6940. This price would leave you money to buy ammo for practice and you could add a optic of your choice latter. Sports Authority and other large retailers have sold the M&P 15 at very good prices, however since demand is up the deals have not been quite as good lately. Buying a quality gun will allow you to use it for a variety things should you later decide you might want to try them. Whatever you get have fun..some people make shooting to much work. Art |
|
Good day.
|
|
Urimaginaryfrnd
MODERATOR Resident Redneck Joined: June/20/2005 Location: Iowa Status: Offline Points: 14964 |
Post Options
Thanks(0)
|
If I was going to do one up at this point I might go for something really wild like a Sun Devil upper and lower in one of the electric colors they offer.
They make and OD Green ceramic coat that would be unique also. In fact I might have them build the Lower after I picked the stock and I would have it done with a Giessele trigger I would want White Oak Armarment built upper 18 in SPR barrel I would want a Smith Vortex flash suppresson on the barrel. You need to decide float tube or quad rails. |
|
"Always do the right thing, just because it is the right thing to do". Bobby Paul Doherty Texas Ranger |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |