Visit the SWFA.com site to check out our current specials. |
Small hunting scope needed. |
Post Reply | Page 12> |
Author | |
jason miller
Optics Apprentice Joined: February/05/2007 Location: W Laf, IN Status: Offline Points: 229 |
Post Options
Thanks(0)
Posted: February/04/2011 at 10:31 |
I have an old Smith and Wesson 1500 in 30-06. This is the same action as a Weatherby Vanguard, and was made by Howa. I like the action design, the trigger isn't too bad, and the walnut stock has fairly nice figure. I actually just stripped the plastic-looking gloss finish off over a recent snow day, and am doing an oil rub finish.
The next step is replacing the Bushnell Scopechief IV 2.5-8x32 that came on the rifle. It's a range compensating type, but missing part of the elevation turret. Bushnell wants something like $196 to fix it, so obviously I'm going to have to junk it. I also wanted to replace the weaver mounts and stamped steel weaver rings, so I have some Leupold rings/bases to go on with a new scope. I bought the Viper 2-7x32 from SWFA, but the ocular bell won't clear the rear base with the low rings I have. I'd prefer not to get medium rings because the stock has a decent amount of drop and I don't like big gaps between the objective bell and rifle barrel. Besides, I'm sure I can find another use for the Viper. This isn't a rifle that will get a lot of use because it's illegal for deer here in Indiana and I have something else more suitable for coyotes. But I would still like to keep the rifle and mount a decent, small, fairly rugged, and still inexpensive hunting scope on it. My immediate thought was a Redfield Revolution 2-7x33 or Weaver V7, but I noticed on Koshkin's website that he recommends the Sightron SII 4x32 as a decent scope. With the $50 rebate, the Sightron seems like it would be a good buy right now. All three scopes could be had for $130-$160. So I ask, does anyone have any input comparing the Redfield Revolution 2-7x32, Weaver V7, and Sightron 4x32? Would they all be comparable optically? Is there another scope I should be considering? My only concerns are that the Redfield has variable eye relief, the Sightron looks to have a pretty short tube, and the Weaver is $30 more than the other two... Thanks in advance for any help. |
|
pyro6999
Optics Retard OT TITAN Joined: December/22/2006 Location: North Dakota Status: Offline Points: 22034 |
Post Options
Thanks(0)
|
if the vortex wont clear with lows, i dont think any of the others will either.
|
|
They call me "Boots"
375H&H Mag: Yeah, it kills stuff "extra dead" 343 we will never forget God Bless Chris Ledoux "good ride cowboy" |
|
jason miller
Optics Apprentice Joined: February/05/2007 Location: W Laf, IN Status: Offline Points: 229 |
Post Options
Thanks(0)
|
The reason it doesn't clear is because it doesn't taper in front of the power ring very much, and that part of the scope is rather long anyway. The power ring on a Monarch 3-9x40 clears...
|
|
pyro6999
Optics Retard OT TITAN Joined: December/22/2006 Location: North Dakota Status: Offline Points: 22034 |
Post Options
Thanks(0)
|
hmm thats interesting. my vortex viper is on low rings and it clears my m70 just fine. oh well. back to your issue... i dont know anything about the weaver, but the sII is probably a good step up from the redfield.
|
|
They call me "Boots"
375H&H Mag: Yeah, it kills stuff "extra dead" 343 we will never forget God Bless Chris Ledoux "good ride cowboy" |
|
tman1965
Optics Master Joined: July/20/2010 Location: South Georgia Status: Offline Points: 1456 |
Post Options
Thanks(0)
|
I have a S&W model 1500, 30-06 and I have leupold bases and low rings with a Bushnell elite 3200 3-9x40. That set up has worked very well for me.
|
|
jason miller
Optics Apprentice Joined: February/05/2007 Location: W Laf, IN Status: Offline Points: 229 |
Post Options
Thanks(0)
|
Yeah, the knurled surface contacts the rear base. Already put a smudge in the base trying to mount it. It's an extended rear base that puts the ring a little further forward though. I'm sure that mounting it in a standard base that didn't extend that far back towards the ocular bell would be just fine. In fact, that's what I plan to do with the scope eventually. Just don't have the rifle to do it with- yet.
Thanks for your input. |
|
jason miller
Optics Apprentice Joined: February/05/2007 Location: W Laf, IN Status: Offline Points: 229 |
Post Options
Thanks(0)
|
Thanks tman, but I am trying to stick with a smaller, more compact scope in this application. I'll never need 9x on this rifle and would enjoy the lower bottom end and smaller size of a 2-7 or 4x.
|
|
pyro6999
Optics Retard OT TITAN Joined: December/22/2006 Location: North Dakota Status: Offline Points: 22034 |
Post Options
Thanks(0)
|
what about that weaver v3 1-3x??
|
|
They call me "Boots"
375H&H Mag: Yeah, it kills stuff "extra dead" 343 we will never forget God Bless Chris Ledoux "good ride cowboy" |
|
jason miller
Optics Apprentice Joined: February/05/2007 Location: W Laf, IN Status: Offline Points: 229 |
Post Options
Thanks(0)
|
I thought about that, but I don't see what it offers that the 2.5-7 doesn't. The 2.5-7 is not much bigger, and the ocular bell/power ring looks to be the same diameter. And the 2.5-7 has a touch more eye relief.
Edited by jason miller - February/04/2011 at 10:51 |
|
pyro6999
Optics Retard OT TITAN Joined: December/22/2006 Location: North Dakota Status: Offline Points: 22034 |
Post Options
Thanks(0)
|
i really think you will like the 4x sII
|
|
They call me "Boots"
375H&H Mag: Yeah, it kills stuff "extra dead" 343 we will never forget God Bless Chris Ledoux "good ride cowboy" |
|
300S&W
Optics God Joined: January/27/2008 Location: Burlington,WV Status: Offline Points: 10592 |
Post Options
Thanks(0)
|
That Sightron has a VERY SHORT mounting area. Like 4.4".
Edited by 300S&W - February/04/2011 at 11:58 |
|
"I ain't got time to bleed!"
|
|
pyro6999
Optics Retard OT TITAN Joined: December/22/2006 Location: North Dakota Status: Offline Points: 22034 |
Post Options
Thanks(0)
|
4.4 could be and issue
|
|
They call me "Boots"
375H&H Mag: Yeah, it kills stuff "extra dead" 343 we will never forget God Bless Chris Ledoux "good ride cowboy" |
|
300S&W
Optics God Joined: January/27/2008 Location: Burlington,WV Status: Offline Points: 10592 |
Post Options
Thanks(0)
|
I mean you can make just about anything fit now a days but that 4.4" is the reason I scratched it off of my list. By the way Jason,I was considering it for my S&W LA. Maybe you want to consider a VXII 4x or 6x?
|
|
"I ain't got time to bleed!"
|
|
jason miller
Optics Apprentice Joined: February/05/2007 Location: W Laf, IN Status: Offline Points: 229 |
Post Options
Thanks(0)
|
I was just on Sightron's website looking at the diagram of measurements and comparing them to the diagram of the Viper. The bases I have are both extended, so it's only 4" from outside edges of the rings. The only issue will be if the ocular bell somehow still touches the rear base. The ocular bell is slightly larger diameter than the Viper(1.61" vs 1.5"), but it also looks like it's shorter and tapers more/sooner. The big honking power adjustment ring on the Viper is the issue with that scope. I think that little Sightron might actually just fit. It also has long enough eye relief(4.8") that I don't think there would be any issue in that area either. But then again, I would bet money that either of the 2-7's I was looking at would fit just fine. Plus, I've been kinda wanting to check out one of those little Redfields anyway. The Sightron just seems like better optics for similar money after the rebate. Aren't SII's supposed to be about equal to a Monarch or Viper?
Edit: A Leupy 4x33 would be just great, but they are a little more money than I'm wanting to spend for this particular rifle. I've done some minor work myself, and it's sort of a "budget" rifle that I intend to keep for pretty much ever. It was an even better deal for a budget rifle until that Scopechief that came on it turned out to be a bust. Edited by jason miller - February/04/2011 at 13:25 |
|
300S&W
Optics God Joined: January/27/2008 Location: Burlington,WV Status: Offline Points: 10592 |
Post Options
Thanks(0)
|
By the time you leave a minimum of .125"(1/8') between the front ring and the objective bell that's only going to leave you with not much more than 1/4" for any scope position adjustment you want to make. Also are your extended bases going to extend out over your loading port?
Maybe locate a used 4x33? Edited by 300S&W - February/04/2011 at 13:40 |
|
"I ain't got time to bleed!"
|
|
jason miller
Optics Apprentice Joined: February/05/2007 Location: W Laf, IN Status: Offline Points: 229 |
Post Options
Thanks(0)
|
That's a good point with the bases extending out over the port. The rear sticks out a half inch, and the front an eighth. I wonder if that would be enough in interfere? I guess I need to get some ammo and shoot this thing to see if it's a problem. Granted, I was thinking about rebarrelling it to 6.5x55- because I've always wanted one. The slightly shorter Swede would probably clear just fine.
I swear, getting the ideal scope/mount/ring setup is an adventure more often than not... Edited by jason miller - February/04/2011 at 14:09 |
|
DAVE44
Optics Journeyman Joined: November/11/2004 Location: United States Status: Offline Points: 652 |
Post Options
Thanks(0)
|
I have had the Sightron SII 4x32 and it is a nice scope. It has a wide plex reticle and I prefer the standard plex. The 4.5 inch eye relief can be an issue because there is very little mounting room and the eye relief is pretty critical with that scope meaning your eye has to be exactly the right distance from the eypiece to get a full view. I had mine mounted on a Marlin 336 30-30 and I had to mount it as far forward in the rings as I could to get the scope far enough from my eye to get a proper image. The eye bell is a little long also so it doesnt taper much.
|
|
300S&W
Optics God Joined: January/27/2008 Location: Burlington,WV Status: Offline Points: 10592 |
Post Options
Thanks(0)
|
I can't imagine a .30-06 cartridge not fitting between the bases. I was more concerned with it just being a hassle to do with maybe not much room for your fingers and a cartridge.
Hey, I'm a musical scope playing junkie although I'm getting better. Right now I've got a 4X Conquest w/1pc Tally's on mine.
|
|
"I ain't got time to bleed!"
|
|
pyro6999
Optics Retard OT TITAN Joined: December/22/2006 Location: North Dakota Status: Offline Points: 22034 |
Post Options
Thanks(0)
|
i wouldnt say the swede is all that much shorter, the normal swede action is considered a "long action" to accommodate those long 6.5mm bullets it shoots. in all reality the 6.5 swede probably uses the same length bolt as the 06 does. |
|
They call me "Boots"
375H&H Mag: Yeah, it kills stuff "extra dead" 343 we will never forget God Bless Chris Ledoux "good ride cowboy" |
|
Tip69
Optics Master Extraordinaire Tip Stick Joined: September/27/2005 Location: Nebraska Status: Offline Points: 4155 |
Post Options
Thanks(0)
|
Would this situation be cleared up with a different set of mounts/rings? Why use "extended"?
|
|
take em!
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |