Visit the SWFA.com site to check out our current specials. |
To flute or not to flute a barrel. |
Post Reply | Page 123> |
Author | |
8shots
Optics Jedi Knight Lord Of The Flies Joined: March/14/2007 Location: South Africa Status: Offline Points: 6253 |
Post Options
Thanks(0)
Posted: January/19/2009 at 07:46 |
I found this on the web. Makes for some interesting reading.
For those not wanting to read this the summary is as follows:
CONCLUSION ON BARREL FLUTING....
|
|
Kickboxer
MODERATOR Moderator Joined: February/13/2008 Status: Offline Points: 23679 |
Post Options
Thanks(0)
|
I defer to Shilen:
What about "fluting" a barrel?
Fluting is a service we neither offer nor recommend. If you have a Shilen barrel fluted, the warranty is void. Fluting a barrel can induce unrecoverable stresses that will encourage warping when heated and can also swell the bore dimensions, causing loose spots in the bore. A solid (un-fluted) barrel is more rigid than a fluted barrel of equal diameter. A fluted barrel is more rigid than a solid barrel of equal weight. All rifle barrels flex when fired. Accuracy requires that they simply flex the same and return the same each time they are fired, hence the requirement for a pillar bedded action and free floating barrel. The unrecoverable stresses that fluting can induce will cause the barrel to flex differently or not return from the flexing without cooling down a major amount. This is usually longer than a shooter has to wait for the next shot. The claim of the flutes helping to wick heat away faster is true, but the benefit of the flutes is not recognizable in this regard until the barrel is already too hot. |
|
Opinion,untempered by fact,is ignorance.
There are some who do not fear death... for they are more afraid of not really living |
|
SamC
Optics Professional Joined: October/01/2007 Location: USA Status: Offline Points: 902 |
Post Options
Thanks(0)
|
OK, now I'm really confused
|
|
Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery. Winston Churchill |
|
mike650
Optics God Joined: May/14/2006 Location: West of Rockies Status: Offline Points: 14569 |
Post Options
Thanks(0)
|
I read that too on Shilen's web site when researching to replace a barrel on one of my rifles. I found it interesting. |
|
“A hunt based only on trophies taken falls far short of what the ultimate goal should be.” – Fred Bear
|
|
rifle looney
Optics Master Joined: November/21/2008 Status: Offline Points: 2553 |
Post Options
Thanks(0)
|
SHILEN IS THE ONLY BARREL CO. THAT SAYS THIS IF IT WERE TRUE NOBODY WOULD BE FLUTING i HAVE HAD BARRELS FLUTED WITH ABSALUTLY NO CHANGES OR EFFECTS ON ANYTHING AND THEY LOOK GOOD AS WELL? SO .....BS
|
|
martin3175
Optics Master Extraordinaire Joined: January/19/2005 Location: Maryland Status: Offline Points: 3773 |
Post Options
Thanks(0)
|
Either way --It looks cool ..I have a factory fluted Weatherby MK V 300 Wby and a Rem 700 LVSF 308 ... both are shooters..The 700 is a magnum contour and the 300 Wby is a traditional sporter #2 contour
|
|
Dale Clifford
Optics Jedi Knight Joined: July/04/2004 Location: United States Status: Offline Points: 5087 |
Post Options
Thanks(0)
|
problem with the model: from science perspective doesn't measure amount of deflection when a known force is applied from the side (except gravity) the analysis of doesn't approach from when whats called "single beam harmonics" or when an impulse is dampened out in the system
the finite element analysis is pretty elementary-- if your curious in this regard run the model in Matlab using their PDE toolbox.
the model and most discussions (on this site and other webs) do not calculate the contribution to strength ratio inherent in "oragami" type topographical configuration. , such technologies such as microphone and speaker membranes etc.
the conclusions is directed towards bench rest shooting -- on a level that should show any differences, by the elmination of many variables, when by the same token it makes the conclusion so specific its not applicable to general use.
usually the arguements just say that the barrel is not as stiff because of the reduction of material accross a unit of cross sectional area. --
the question that should be asked -- at what level can the dia. of the barrel be reduced , by using a fluting technique, to gain the shooting properties of a thicker heavier barrel.
personally I like flutes, especially the snaky ones on the Volquartson target 22s.
|
|
Roy Finn
MODERATOR Steiner Junkie Joined: April/05/2004 Location: United States Status: Offline Points: 4856 |
Post Options
Thanks(0)
|
If I were to ever contemplate a fluted barrel I would have the barrel maker do the fluting at the time of installation. My reasoning is that any lapping to final dimensions should be done by the barrel maker. Fluting a barrel after the fact (after stress relieving) runs the risk of changing the accuracy for the bad. I have never heard of a barrel being more accurate after fluting, however if the barrel is the same accuracy wise then all is good. Personally, I think flutes look cool on most rifles with the exception of a fancy wood stocked classic type bolt gun.
|
|
mike650
Optics God Joined: May/14/2006 Location: West of Rockies Status: Offline Points: 14569 |
Post Options
Thanks(0)
|
|
|
“A hunt based only on trophies taken falls far short of what the ultimate goal should be.” – Fred Bear
|
|
rifle looney
Optics Master Joined: November/21/2008 Status: Offline Points: 2553 |
Post Options
Thanks(0)
|
PS....that varmint Al he is a good guy.....
|
|
Average Joe
Optics Master Joined: April/24/2008 Status: Offline Points: 2178 |
Post Options
Thanks(0)
|
So spiral fluting is better than straight fluting ?
|
|
I'm classic shag nasty type.
|
|
rifle looney
Optics Master Joined: November/21/2008 Status: Offline Points: 2553 |
Post Options
Thanks(0)
|
No ,just a different look and it removes a little bit more material due to with a spiral the flute is longer.
|
|
freidasboss
Optics GrassHopper Joined: January/27/2008 Status: Offline Points: 18 |
Post Options
Thanks(0)
|
Do you guys consider Shilen the same quality as Lilja and Krieger? Was looking at an Ed Brown gun. It has Shilen barrel. |
|
Roy Finn
MODERATOR Steiner Junkie Joined: April/05/2004 Location: United States Status: Offline Points: 4856 |
Post Options
Thanks(0)
|
The Select Match yes.
|
|
Urimaginaryfrnd
MODERATOR Resident Redneck Joined: June/20/2005 Location: Iowa Status: Offline Points: 14964 |
Post Options
Thanks(0)
|
seems to work ok Edited by Urimaginaryfrnd - January/20/2009 at 02:18 |
|
"Always do the right thing, just because it is the right thing to do". Bobby Paul Doherty Texas Ranger |
|
Kickboxer
MODERATOR Moderator Joined: February/13/2008 Status: Offline Points: 23679 |
Post Options
Thanks(0)
|
When you have as much metallurgical experience, have constructed as many national champion barrels as Shilen, I will take your "BS" with a grain of salt... until then to your comment.
"IF IT WERE TRUE NOBODY WOULD BE FLUTING"... totally disagree. If the public finds something "cool" and it is a marketable activity with questionable result (does it or doesn't it improve or decrease accuracy...kind of like moly-coated bullets), most of the market will adopt the practice. Shilen has done research and has taken a stance based upon that research. Others choose not to. I do not believe there has been a definitive research effort performed with finding in either direction, at least I have not been able to find it. Just because you have had barrels fluted and you have not noticed any change does not qualify as definitive testing and analysis.
Personally, I don't know. I have not done any detailed testing or research on the matter, but the little I did do led me to go with Shilen's analysis. I can find no real pro or con for/against fluting, other than "it looks cool" ( I happen to like the way it looks, and if it were to turn out to have no potentially detrimental effects, might like to have it done to a couple of rifles...IF). I have one rifle with a fluted barrel and it is the most accurate rifle I have ever fired. Does fluting have anything to do with that?... absolutely NOT. IF I could have gotten the rifle without a fluted barrel, I would have. That is how it was produced and its other accuracy enhancements overcame my reservations for a fluted barrel.
I test weapons and systems of weapons for a living. The only really serious contender for a full military rifle with fluted barrel was the XM8, which was cancelled/delayed until about 2011 or so(NOT for reasons of fluting. However, the barrel did produce such significant heat that the stock grip would melt under heavy firing... projected barrel life was around 15k rounds, which is about double current M16...fluting was not, however, the suggested reason for that, but the hexagonal rifling... have no evidence of what role fluting actually played).
I am on the fence on this. I LIKE the way fluting looks. I have no real evidence for or against. BUT, when a company like Shilen tells me there are potential detriments due to fluting, I am going to listen. The fact they WILL NOT flute a barrel (which they could command big bucks to do) and will void the warranty on one of their barrels if it is fluted, speaks much... to me. You don't have to listen.
|
|
Opinion,untempered by fact,is ignorance.
There are some who do not fear death... for they are more afraid of not really living |
|
rifle looney
Optics Master Joined: November/21/2008 Status: Offline Points: 2553 |
Post Options
Thanks(0)
|
I agree with that statement. but they are still the only people not doing it so there for I and many others believe it has very very little affect. and I appreciate your expertise and background. so if you like it do it.
|
|
Kickboxer
MODERATOR Moderator Joined: February/13/2008 Status: Offline Points: 23679 |
Post Options
Thanks(0)
|
Just for the record:
There is no question about the cooling effects of fluting...more surface area presented, more cooling. The only questions come to the inherent effects on accuracy. However, Shilen, again, has a point, if you need that cooling, your barrel is already HOT. For some high rate of fire weapons, this is not that big an issue...cooling is much more important than potential inaccuracy induced by unpredictable barrel flexion. Shallow fluting on large diameter barrels possibly has less effect on accuracy and more effect on cooling. Those are special cases and not the "general usage" categories. I do not believe we have been discussing carrying around that type of HEAVY barreled weapon. For very high rate of fire, fluting can be a good thing.
|
|
Opinion,untempered by fact,is ignorance.
There are some who do not fear death... for they are more afraid of not really living |
|
dougedwards
Optics Apprentice Joined: April/16/2008 Location: Williamsburg, v Status: Offline Points: 213 |
Post Options
Thanks(0)
|
I can't imagine how cutting metal from a barrel's surface could cause it to be more accurate. As for cooling, a fluted barrel will also heat up faster because it has less metal to dissipate the heat. That being said I have chosen a fluted barrel for my new custom made rifle as it is a bit muzzle heavy because if it's length. I am hoping that it will shoot as accurately as a non-fluted barrel but I feel that also depends on the skill of the barrel maker in his cutting and also in stress relieving the barrel.
|
|
but you brethren are not of the flesh but of the spirit if indeed the spirit of Christ dwells within you...Romans 8
|
|
Kickboxer
MODERATOR Moderator Joined: February/13/2008 Status: Offline Points: 23679 |
Post Options
Thanks(0)
|
Doug, I believe the metal loss is overcome by increased surface area presented to the atmosphere. Stands to reason that with more surface area "in the open", more heat will dissipate, but that is a by product of fluting, I think.
Your thouhts on the cutting process are probably more important than you indicate.
Fluting is primarily for decreasing weight of larger barrels. Smaller diameter, lighter barrels should not, probably cannot be fluted, but if you have a large diameter, heavy barrel, it can be fluted to reduce weight. One then has to "weigh" (so to speak) what effects that may have on accuracy. Stresses involved may all come down to how well the fluting job is performed. In which case, getting it done properly would be time consuming and therefore very expensive.
At this point in my life, weight reduction and cooling effects are not that important to me... not important enough to outweigh potential accuracy issues and additional cost. I am not shooting at such a high volume to make temp an issue and the weight doesn't bother me, yet. Someday, that may change.
|
|
Opinion,untempered by fact,is ignorance.
There are some who do not fear death... for they are more afraid of not really living |
|
Post Reply | Page 123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |