Visit the SWFA.com site to check out our current specials. |
AO weakness |
Post Reply | Page 123 4> |
Author | ||
dougedwards
Optics Apprentice Joined: April/16/2008 Location: Williamsburg, v Status: Offline Points: 213 |
Post Options
Thanks(0)
Posted: December/28/2008 at 13:48 |
|
There is an ongoing discussion in a smokeless muzzleloader forum concerning the failure of rifle scopes mounted on very hard kicking rifles. These modern muzzleloaders are kicking out 300 grain projectiles under as much as 80 grains of powder at 2400+ fps from the muzzle. Great scopes like Zeiss Conquest, Bushnell 4200 and Sightron Big Sky are breaking at an alarming rate and many times it is the parallax adjustment that goes whether it is on the objective bell or side focus.
I have never seen this particular subject arise on this forum and was wondering if others have noticed the AO feature of a scope to be a mechanical weak link in rifle scopes atop hard kicking hunting rifles?
One offered solution was to go with Nightforce scopes since they have proven themselves to be solid as tanks. The drawback is that most of them are very heavy. Nightforce evidently has two new scopes out that are lighter in weight which is the 1-4x24 with FC-2 reticle and 2.5-10x24 with NP-1 or Mil Dot. Any input on either of these non-AO scopes as a reliable scope for hard recoiling hunting rifles?
Doug Edited by dougedwards - December/28/2008 at 20:57 |
||
but you brethren are not of the flesh but of the spirit if indeed the spirit of Christ dwells within you...Romans 8
|
||
Dale Clifford
Optics Jedi Knight Joined: July/04/2004 Location: United States Status: Offline Points: 5087 |
Post Options
Thanks(0)
|
|
entirely ignorant on blackpowder, please forgive, why do you need ao on a black powder gun??? |
||
lucytuma
Optics Jedi Knight Joined: November/25/2007 Location: Wisconsin Status: Offline Points: 5389 |
Post Options
Thanks(0)
|
|
Great reply Dale.
|
||
"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." - Thomas Jefferson
|
||
dougedwards
Optics Apprentice Joined: April/16/2008 Location: Williamsburg, v Status: Offline Points: 213 |
Post Options
Thanks(0)
|
|
I don't even think it is possible to shoot a 250 or 300 grain bullet to 2400+ fps with black powder. If it is it would require LOTS of powder and a very long barrel. I am using Reloder7 and 10x as my powders of choice but there are many other from with to choose. You have to understand that these rifles are capable of MOA accuracy out to 400 yards and beyond.
Is there no opinion on the AO features of scopes as it pertains to my question??
Doug
|
||
but you brethren are not of the flesh but of the spirit if indeed the spirit of Christ dwells within you...Romans 8
|
||
Dale Clifford
Optics Jedi Knight Joined: July/04/2004 Location: United States Status: Offline Points: 5087 |
Post Options
Thanks(0)
|
|
Yes I know some folks in the price area of utah who shoot at steel cut outs of buffalo with crossed sticks, 8 inch long venier peeps, 45,something or other black powder cast bullets, paper patch, at 1000 yds. they don't cook their meat and none of the alcohol is filtered, but what the hell. (some have a wife for each gun) sorry back to the subject. not saying they aren't sub moa guns but with a 45 cal bullet, its larger than the error from the parallex caused by the ao error. how do they know which one causes the error? also the ao advantage is dependant on zoom range, unless its a fixed power of course, but never saw one on anything less than 12x. this type of recoil is seen routinely in three gun matches with 3 inch slugs and semis. but the shots are only to 100 yds. I seriously doubt if these guns recoil as much as my 416, but I could run some calculation, I just use leo v3 low range variables. |
||
dougedwards
Optics Apprentice Joined: April/16/2008 Location: Williamsburg, v Status: Offline Points: 213 |
Post Options
Thanks(0)
|
|
Thanks for the reply. I am wondering if you have a scope with AO on your 416. Or if anyone who has the AO feature on a scope of any really hard kicking rifle has experienced the adjustment getting stuck and not being able to adjust it at all. This isn't about the small amount of parallax error encountered when shooting at varying distances. What is happening is that the scope is not able to focus throurgh out the whole magnification range. I actually own a Kahles CL Multizero 3-9x42 which just happens to come with a side parallax adjustment. I agree that AO isn't particularly needed for this magnification but I had to send the scope back to Austria when the adjustment got stuck for repair. It was stuck on 30 yards and would not focus on any magnification over 6x.
Maybe it is all just coincidence that so many smokeless muzzleloader shooters have high failure experience with scopes in general but I don't think so. Actually the AO is only one of the mechanical failures experienced by Zeiss, Bushnell, Sightron, Leupold, Nikon and many other manufacturers of rifle scopes but a good percentage of the mechanical failure seems to manfest itself as a stuck AO adjustment. If noone here has experienced this phenomenon then possibly it is just coincidence. I am trying to determine that.
Doug
|
||
but you brethren are not of the flesh but of the spirit if indeed the spirit of Christ dwells within you...Romans 8
|
||
rifle looney
Optics Master Joined: November/21/2008 Status: Offline Points: 2553 |
Post Options
Thanks(0)
|
|
Correction these are inline smokeless rifles not muzzle loaders...a real muzzle loader does not wear a scope. and they are not shot beyond 150/200yrds.. not trying to be rude or offensive just letting people know the difference. and 2400fps thats smokin! no pun.....
|
||
dougedwards
Optics Apprentice Joined: April/16/2008 Location: Williamsburg, v Status: Offline Points: 213 |
Post Options
Thanks(0)
|
|
Yes I hear alot of that and I somewhat agree with you. The only thing that makes these rifles muzzleloaders is that you must load from the muzzle and the powder is not encased. This is why I would like to get the focus off of the fact that these scopes are failing on "muzzleloaders" unless for reasons that I cannot think of.......these smokeless rifles are reacting in some different manner than centerfires as far as recoil is concerned.
Also I have read lots of posts on this forum stating that nothing over 10x is ever required for whitetail deer hunting. While this might be true there is nothing wrong with being over magnified if it isn't costing in other areas. Many have chosen scopes that are also utilized as spotting scoes at the range or for scrutinizing the antlers of feeding deer at long range.
The consensus in the smokeless muzzleloader forum is to stay away from scopes that have the AO feature as they seem most suseptible to mechanical failure. I am just trying to determine if the AO feature is truly a weak link in the mechanical make-up of a rifle scope.
Doug
|
||
but you brethren are not of the flesh but of the spirit if indeed the spirit of Christ dwells within you...Romans 8
|
||
rifle looney
Optics Master Joined: November/21/2008 Status: Offline Points: 2553 |
Post Options
Thanks(0)
|
|
I only have one AO and its on a little 22/250 so no answer from me but I have never heard of this happening before,doesn't mean it hasn't but I also have never seen one on a inline either. but you are obviously having issues.I would contact one of the scope companies first hand. best of luck!
|
||
koshkin
MODERATOR Dark Lord of Optics Joined: June/15/2004 Location: United States Status: Offline Points: 13182 |
Post Options
Thanks(0)
|
|
Parallax adjustment brings in more moving parts. Perhaps there is something about the recoil impulse of these rifles that wreaks havoc on modern scope, but I have not heard that before.
Perhaps the solution is to try a fixed power of some sort (like Super Sniper 10x42) or IOR 6x42. ILya |
||
Dale Clifford
Optics Jedi Knight Joined: July/04/2004 Location: United States Status: Offline Points: 5087 |
Post Options
Thanks(0)
|
|
ive had all kinds of scopes failures, the worst guns on scopes are large caliber handguns, 454, 500 sw , large caliber T/Cs .. is there a specific group of zoom range that is failing. also a 300+80 gr at 2400 fps is right in the 416 recoil range, are these guys bench these guns on lead sleds or something-- a little more insight into the conditions would help.
as to your question off a common link of ao failing -- I don't recall the topic coming up as long as I've posted on the forum. Edited by Dale Clifford - December/28/2008 at 22:02 |
||
Sparky
Optics Master Extraordinaire Joined: July/15/2007 Location: SD Status: Offline Points: 4569 |
Post Options
Thanks(0)
|
|
Either one of the Nightforce scopes you list have been out for a number of years and are very reliable. I would not hesitate to use one on any hard recoiling rifle. Also there are more reticle choices available than the ones you list. I like the 2.5-10 with the NPR2 reticle. |
||
dougedwards
Optics Apprentice Joined: April/16/2008 Location: Williamsburg, v Status: Offline Points: 213 |
Post Options
Thanks(0)
|
|
There doesn't seem to be a specific group of zoom range that is being affected as it ranges from 3-12 to 5-24 and everything in between. We do sometimes use Led Sleds at the range. I know that I do. One thing I have noticed is that almost all of the failing scopes sported a 1" tube but none that I know of had 30mm or more main tube. You would think that recoil would have a similar affect on both scopes no matter the main tube size because they have similar internals.
|
||
but you brethren are not of the flesh but of the spirit if indeed the spirit of Christ dwells within you...Romans 8
|
||
dougedwards
Optics Apprentice Joined: April/16/2008 Location: Williamsburg, v Status: Offline Points: 213 |
Post Options
Thanks(0)
|
|
The Nightforce and IOR Valdada scopes do seem to built like tanks and are very reliable. They have two drawbacks. One is the price. The other is the weight. But if I want to be sure that my scope is aligned and sighted in when a nice buck walks out I guess I am going to have to sacrifice in some areas.
Doug
|
||
but you brethren are not of the flesh but of the spirit if indeed the spirit of Christ dwells within you...Romans 8
|
||
Jon A
Optics Journeyman Joined: March/14/2008 Location: Everett, WA Status: Offline Points: 670 |
Post Options
Thanks(0)
|
|
In general, the 30mm tubes are going to flex much less during recoil which will only help in keeping the internal bits rigidly mounted and aligned properly. A wet noodle is a difficult place to put a complex optical system with moving parts and expect it to last, no matter how good the internals. Of course tube size doesn’t directly affect the strength of the actual adjustable objectives, that’ll come down to the size/weight of the glass itself vs. the strength of the adjustment mechanism. Though one might expect many of the cheaper/lighter weight 1” scopes to have less beefy construction in that area. |
||
Horsemany
Optics Journeyman Joined: February/28/2008 Location: Nebraska Status: Offline Points: 643 |
Post Options
Thanks(0)
|
|
|
||
Jon A
Optics Journeyman Joined: March/14/2008 Location: Everett, WA Status: Offline Points: 670 |
Post Options
Thanks(0)
|
|
That's where that strength/stiffness to weight ratio silly concept comes in.
|
||
Horsemany
Optics Journeyman Joined: February/28/2008 Location: Nebraska Status: Offline Points: 643 |
Post Options
Thanks(0)
|
|
What's so silly about it? Someone should do an independent torture test. I think Pyro said he'd volunteer some scopes.
|
||
Dale Clifford
Optics Jedi Knight Joined: July/04/2004 Location: United States Status: Offline Points: 5087 |
Post Options
Thanks(0)
|
|
THe lighter the scope the less affect recoil inertia forces have on the optics.
you lost me on that -- could you show me the physics?
|
||
Horsemany
Optics Journeyman Joined: February/28/2008 Location: Nebraska Status: Offline Points: 643 |
Post Options
Thanks(0)
|
|
Imagine as the gun recoils...you have a scope bolted to the gun. So the gun is sharply recoiling backwards and we are expecting the scope to come with it. The lighter the scope the easier it will go from motionless to.....violent recoil backwards. Simply put, a lighter scope will move more freely with the recoil of the rifle. It will resist a sudden change in direction less than a heavy scope. Someone wrote...an object at rest will stay at rest....
The real question is....how big of a difference does it make? What's the "silly ratio"?
|
||
Post Reply | Page 123 4> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |